Collectibles > Replacement Parts for Pyramids
|
|
We stock a good supply of the key replacement parts that fit the most popular
German Candle Pyramids including Fences, Candle Holders, Blades and Hubs, as
well as Wheel Assemblies, Glass bearings, replacement lamps and metal axis shafts...
Parts that will fit the following Pyramid makers: Müller, Volker & Heiko Flath,
Richard Glässer, KWO, Blank and Holzkunst Christian Ulbricht.
Blades & Hub Assemblies l Candle Holders
Fences & Figures l Glass Cup Bearings l Light Bulbs
If you are in search of a unique piece that is missing or broken, please email us
with your request and include the exact dimensions, description and the name
of the maker and we will make an effort to obtain this for you.
(Sorry - Replacement Parts can not be returned.)
German Candle Pyramids l Pyramid Candles in 5 sizes
Pyramid Replacement Parts l Tea Light Candles & Accessories
|
|
Other Similar Products
|
|
DR007/XXX
Glass Frills - Candle Cuffs Glass Drip Catchers
These glass sleeves are both decorative and functional.
These Lichtmanschette offer protection to your pyramid and
other Christmas valuable from any potential dripping wax or
candles burning too low!
They are available in four sizes, two for Medium 14mm
candles, one for Large 17mm candles and even one for Tea
Light or small pillar candles.
Medium - 50mm outside - 15mm hole - Serrated Bowl Edge
Medium = 40mm outside - 15mm hole - Plain Clear Edge
Large - 50mm outside - 20mm hole - Scalloped Edge
Tea Light - 70mm outside - 40,5mm hole - Scalloped Edge
Clear with edges that vary...
Made in Germany - Sold Individually
|
|
|
$3.95
|
|
RG-91018-19
Replacement Brass Cups & Drip Catchers
These Brass drip cups and drip catchers are designed for a
variety of pyramids and makers. They are available in a
medium, large and extra large size for the respective candle
sizes 14mm, 17mm and 20mm.
The Medium size - 14mm will fit many of the newer style
pyramids. They are designed to hold the Medium sized 14mm
candles (About 9/16 inch in diameter).
Catchers are 38mm diameter with a 16mm hole. Cups are 19mm
diameter with 14mm interior.
The Large size - 17mm will fit many of the Richard
Glässer pyramids as well as and many of the older Expertic -
Erzgebirge (GDR era) pyramids. They are designed to hold
the Large sized candles which are 17mm wide - 11/16 inch.
Catchers are 41mm diameter with a 18mm hole. Cups are 21mm
diameter with 17mm interior.
We have recently added the Extra Large sized cups and drip
catchers which accommodate the 20mm candles.
Set of 6 Brass Drip Cups & 6 Drip Catchers
3 Illustrated - Made in Germany
|
|
|
$14.95
|
|
RG91457
Metal Axis Rods for Ulbricht Glässer Pyramids
These metal axis rods are designed to fit in
the 160/167 Series of pyramids made by
Richard Glässer, however they may also
fit in other designs.
The second option is designed to fit an
Ulbricht single-Tiered pyramid, like 33-202.
Extreme care should be taken when installing
these axis rod as to not bend them! Five
sizes currently available...
RG - 160 Series: 3 mm dia x 19,8 cm length
(3/16 inch x 7-3/4 inch)
RG - 167 Series: Single Tiered Pyramid
6 mm dia x 24,0 cm length
RG - 167 Series: Two Tiered Pyramid
6 mm dia x 34,0 cm length
RG - 167 Series: Three Tiered Pyramid
6 mm dia x 44,0 cm length
UL - 2 mm diameter x 17,0 cm length
(1/8 inch x 6-3/4 inch)
|
|
|
$9.95
|
|
RG-10903-Parts
Center Axis Parts Glässer Advent House Pyramid
This metal axis rod & the wooden shaft thread
together and are designed to fit within the
Adventhaus Pyramid (Now a Retired Design)
made by Richard Glässer - #10903.
It may fit other brands or models from RG.
Extreme care should be taken when installing
any metal axis rod as to not bend it!
Metal Rod: 185 x 2,5 mm - 7-3/4 x 1/8 inch
Metal Axis Rod is threaded at one end.
Lower Wooden Rod: 38,0 x 1.5 cm
Genuine Replacement Parts
Made in Germany by RG
Erzgebirgische Volkskunst
Richard Glässer GmbH Seiffen
|
|
|
$29.90
|
|
DRPG-BELL
Glass Bells for Blank 7 Angel Pyramid
These little glass bells are a replacement part and are used
with pyramids PG002 and PGF002 produced by the firm Blank.
These Christmas Pyramids display 7 angels and four glass
bells, both in natural and painted finishes.
The glass bells hang within these Blank Angel
pyramids including this PG002 7 Angel Pyramid.
Click on Link to see details of pyramid.
Each bell measures 1-3/4 x 1 inch and includes clapper and
metal hook.
We also offer the Metal Striker that hits the clapper
extension as the center rotates. Please use drop down
options - Items sold separately.
We now also stock and sell this pyramid as well as
replacement blades and replacement Angels!
|
|
|
$15.95
|
Previous 5
Next 5
|